Description: Horizontal flying probe tester (FPT), w/ 4 heads top & 4 heads bottom, max. panel size: 650 x 475 mm, max. test area: 610 x 460 mm, max. panel thickness: up to 7 mm, probe accuracy: ±20 ?m, repeatable accuracy: ±10 ?m, camera system w/ 2 cameras for optical scanning of top & bottom side, adjustable (camera) accuracy: 5 to 100 ?m, temperature:19 °C to 27 °C, overall machine dimensions: 1844 x 833 x 1738 mm, 230 V - 50/60 Hz - 1800 VA. Year: 2004.
Description: LDI, laser with a max power of 4 Watt, solid state laser replaced in 2013 and 16.500 hours remaining life time. Case with about 50 Master plates included. spare parts. Serial nr. DP 031001. Year 2003.
Description: Double sided grid tester, top and bottom 70 mill grid, max test size 508 mm x 487 mm, spring cassette only in bottom as this machine has been used for single sided testing only, 14 Electronic cards installed in the top. Max test voltage 250 V. Year 2002
Description: Emma, EMX 8161, Flying probe tester (FPT), 4 probes and 4 CCD camera's, HV option installed for max 500V ( OPTHVS 014 HVS ), option HV test for 1000V and 1500V can be purchased additionally, max. panel size: 650 x 750 mm. Machine has been running production for ONLY two years. New price has been Euro 240.000. YOM 2011.
Description: Tabletop measuring device, max. measurement: 7 mm, possible measuring: 200 times/second, shank diameter: 3.175 mm, measurable range length: 33,5 - 38,5 mm, positioning bolt stroke: 5 mm, BCD parallel output (EXT output). overall machine dimensions: 182 x 136 x 149 mm. Serial no. OM197308.
Description: AOI, max. panel size: 686 x 711 mm, max. inspection area: 640 x 686 mm, thickness range: 2-200 mil, overall machine dimensions (LxDxH): 1270 x 2900 x 1730 mm, serial no. SP 043040. Year 2004.
Description: Controlled Impedance Test System w/ PC & manual. Overall unit dimensions: 443 x 280 x 114 mm, please find the more specific test parameters within the data sheet attached, last calibration by polar in 2012. Serial no. 015493.
Description: Horizontal flying probe tester (FPT) with 16 probes, 8 bottom - 8 top side, alignment system w/ CCD B/W cameras (both sides), max. panel size: 670 x 650 mm, max. test field: 620 x 600 mm, overall machine dimensions: 1500 x 2300 x 1450 mm, serial no. 98 06 00A2 344. Year 1998.
Description: Emma. Vertical Fixtureless Bare Board Tester, Flying probe (4x), 2 test heads front, 2 rear, 2 CCD camera's front and 2 rear, max. panel size 610 x 460 mm, overall machine dimensions: 1460 x 680 x 1741 mm, serial no. E7226400. Year 10/2004.
Description: XYZ optical measuring table for surface topographics, PC assist and suitable as profilometer ( 2D ) or as an imaging measuring instrument (3D). Overall machine dimensions (L x W x H): 1600 x 1300 x 1250 mm. serial nr.: MPR 1168. Year 2006.