Description: Magazin unloader, min. panel size: 300 x 300 mm, max. panel size: 650 x 650 mm, min. panel thickness: 0,8 mm, adjustable working height: 920 +/- 50 mm, incl. 1 carts and 1 slotted tray, overall machine dimensions: 1550 x 1423 x 1975 mm, 230 V - 50 Hz - 3,17 A. Year: 1999.
Description: manual operated lead-free hot-air leveler (HAL), max. panel size: 650 x 450 mm, max. panel thickness: 5.,0 mm, adjustable air knife: 0,1 - 0,4 mm, Sn tank: 250 Kg, overall machine dimensions: 1760 x 780 x 1980 mm, 6-8 bar, 230/400 V - 50 Hz - 3 phase. Year 2006
Description: LPI Developer, min. panel size: 250 x 250 mm, max. panel size: 650 x 650 mm, panel thickness range: 0,1 - 4,5 mm, conveyor speed: 1,0 m/min, working direction: R > L: Input > developer (1) > developer (2) > Cascade rinse > dryer > output. overall machine dimensions: 5310 x 1605 mm, adjustable working height 900 +/- 15 mm, control cabinet dimensions: 1600 x 500 x H: 2000 mm. 400 V - 3 phase - 50 Hz. Year: 2000.
Description: Cascade rinse module w/ 3x top & 3x bottom, incl. short input & output with dryer, working direction R > L, max. panel width: 610 mm, panel thickness range: 0.20 - 3.2 mm, adjustable height, rinse length 805 mm, overall machine dimensions (LxDxH): 1255 x 1380 x 1250 mm, module of PILL machine no. 1032. Year: 1999.
Description: Conveyor driven hot air oven. min. panel size: 250 x 250 mm, max. panel size: 650 x 650, adjustable conveyor speed: from 0,5 to 4,0 m/min, temperature range: 120 - 140 *C, overall machine dimensions: 6200 x 1260 x 1140 mm, control unit dimensions: 800 x 500 x 1100 mm, 400 V / 50 Hz. excellent condition. Year 2007.
Description: Auto exposure w/ one 3,5 kW ultrahigh light source, min. panel size: 330 x 250 mm, max. panel size: 610 x 510, board thickness: 0.1 - 2.0 mm, alignment accuracy: 20 microns, adjustable conveyor height: 870 - 930 mm, overall machine dimensions (W x D x H): 3200 x 2175 x 2320 mm, 200 V, 3 Phase, 50 Hz. Please see the attached PDF-file for more information. Year: 1998.
Description: Photoresist developer - single sided for metal etch- no oscillation in spray bars-, adjustable conveyor speed: 0,5-2,5 m/min, max. panel width 690 mm, min./max. panel thickness: 0,4 - 6 mm, total machine length: 3740 mm, adjustable height: 900 - 950 mm, working direction L > R: input - conditioner - triple rinse - dryer. Year 2012
Description: High-lifter for barrel transport w/ foot pedal for hydraulic operated lift, adjustable gripping device and tilt gear, max. lift capacity: 300 Kg, used, but in good working condition, serial no. 80.1912. Year 1981.
Description: Lab oven, natural convection, adjustable temperature from ambient +5C up to 250C, Stability +/- 0.3 C, Homogeneity +/- 3.25C up to 150C, Inner dimensions LxWxH 290 x 300 x 390 mm, Outer dimensions LxWxH 640 x 450 x 580 mm.
Description: PCB integrated plug beveling, jump function, feed rate with servo motor, toll angle freely adjustable, beveling distance freely programmable, min PCB thickness 0.3 mm (0.012") max PCB thickness 3.2 mm (0.125"), resolution of positioning 0.01 mm (0.0004"), position accuracy +/-0.03 mm (+/-0.0012"), clamp length: 610 mm, serial no. 311.102/004. Year 11-2006 Find detail specs attached.
Description: Panel diverter / corner turner, type: TRS - RTG, max. panel size: 620 x 620 mm, overall machine dimensions (excl. cabinet): 900 x 880 x 930 mm, adjustable height, serial no. 119A60.098. Year 2006.
Description: Automatic cut-sheet laminator. adjustable front and rear edge between 0 and 50 mm, max. panel size: 787 x 787 mm, Thin panel option panel thickness 0,5 - 5 mm, overall machine dimensions (closed): 1740 x 1460 x 1670 mm, serial no. 06202185. Year 1998.
Description: Manual hot air leveler, Max Panel size LxW 700 x 700 mm, max Thickness Panel 5 mm, Capacity max 160 Panels per hour, 32KW Power consumption, SnPb-tank volume 260 KG, Heating time approx 1 hour, Airknife gap 01-04 adjustable, Overall machine dimensions LxWxH 1840 x 850 x 2400 mm, Year build 1997.
Description: Manual exposure unit, including CCD Automatic Film and Panel Alignment, 2 camera's each draw, MVA Software, Glas-Glas frames, adjustable 3-5 KW, max panel size 610 x 760 mm (24 x 30"), scattered light source, artwork drawing attached New installed Febr 2006.
Description: Manual copper foil sheeter, a new roll will be lifted by a manual chain lift, then the roll will be guided by the ceiling
guides to its unroll position. Two rolls can be loaded. The rolls are unrolled as long as the red foot switch is activated. On the white table there is a measuring scale to adjust the length of the sheets to be cutted.
Description: 506-201 / H4-15 Double Scale Vernier Height Gauge 0-150mm / 0-10" A Mitutoyo vernier height gauge with a dual unit, adjustable main scale. Stainless steel construction with easy-to-read, satin-chromed scales.
Description: Small single sided UV table oven, conveyorized Stainless Steel belt, max conveyor width 440 mm, belt speed adjustable, Max power 4500W, 380V, outher dimensions oven LxWxH 1410 x 630 x600 mm, dimensions Transformer LxWxH 400 x 500 x 500 mm, used & good working condition.
Description: Small single sided UV table oven, conveyorized Teflon belt, max conveyor width 400 mm, belt speed adjustable, Max power 4500W, 380V, outher dimensions oven LxWxH 1270 x 630 x630 mm, dimensions Transformer LxWxH 400 x 500 x 500 mm, used & good working condition.
Description: Single sided curing system w/ 3 lamps, adjustable speed, SS steel belt, max panel width 610 mm, max. panel thickness: 9 mm, overall machine dimensions LxWxH 2050 x 980 x 1350 mm, exhaust air volume: 900 m3/h, pipe diameter: 150 mm, electrical information: 380V, / 35 Amps / 3~ / 50 Hz.
Description: Final clean line, Left to Right, working width 650mm, conveyor width 725mm, Total line length 5.975 mm, Total width 1800mm, Input conveyor 810 mm, High pressure and low pressure rinse 1335 mm, Cascade rinse 6x 1910 mm, Drying 50-60C 1110 mm, output 810mm, Speed adjustable 0.6 up to 6.0 m/min, Max panel size 530 x 630 mm, min Panel size 60 x 40 mm, min/max panel thickness: 0,2mm + 2x 17,5 um Cu / 3.5 mm, power 400V 50Hz max power 74KW. Two Grundfos pumps of 120 bar each, new price Euro 150.000. year 2006
Description: Dryer , stainless steel housing , two heating zones with each separately temperature setting, 6 sets of air knives, conveyor speed setting, max panel width 610 mm, conveyor height 850 -950 mm adjustable, outer dimensions 1600 x 1200 x 1300 mm (h), dimensions control cabinet 600 x 930 x 260 mm, year 1998.
Description: Glas glas frame top and bottom draw, overall size 1080 x 850mm, maximum exposure area 630 x 480 mm, distance left to right on guiding rolls 1040 mm. The overall width between guiding rolls can be adjusted.
Description: double sided 70 mil tester, auto load and unload, full grid 16"x 19,2" ( 406 mm x 487 mm ), two micro adjustment frames, Snr. 813033. This machine has been sealed and stored after running production for only 5 years. Year build 1999.
Description: Festo Filter Regulator + Branching module + Electrical pressure switch, for unlubricated compressed-air supply with electrical monitoring of pressure setting. Switching point adjustable from 1 to 12 bar.
Condition: USED but in good working order.
Article Number: 23746
Price: € 100 (VAT Excl./ Ex works Vitech Int. BV/ 100% Payment by TT or Paypal with your order, prior to shipment)
Description: The KB Electronics KBIC-240 is an adjustable speed DC Drive. It will control motors between 1/50-1.0 HP (2.0 HP w/aux. Heat-sink). it's designed for 180 VDC PM & Shunt motors. Speed range is 50:1 with load regulation of 1%.
Article Number: 22920
Price: € 90 (VAT Excl./ Ex works Vitech Int. BV/ 100% Payment by TT or Paypal with your order, prior to shipment)