PCBequipment.com
Youtube

Multilayer production

 
HML - LP2000V BE 8S   

HML - LP2000V BE 8S

Brand: HML

Type: LP2000V BE 8S

Description: 2 opening multilayer press, electric heating, incl. 8 vacuum frames & manual loading cart, 400V, 50/60 Hz. Year: 2001.

Article Number:  26612
Shoppingcart
 
 
Cedal - RMB 66 S   

Cedal - RMB 66 S

Brand: Cedal

Type: RMB 66 S

Description: Innerlayer welder, 6 welding heads, max panel 650 x 720mm, year 1999.



Article Number:  26604
Shoppingcart
 
 
Printprocess  - Rivomat   

Printprocess - Rivomat

Brand: Printprocess

Type: Rivomat

Description: 4 head driller rivetter, year 2001.

Article Number:  26605
Shoppingcart
 
 
Lauffer - RLKV 40/1   

Lauffer - RLKV 40/1

Brand: Lauffer

Type: RLKV 40/1

Description: One opening hydraulic lamination press w/ loading cart. max. panel size:  630 x 420 mm, max. lamination area: 530 x 340 mm, max. pressure force: 400 kN, max. lamination pressure: 222 N/cm2, max. operating temp: 300 C,  max. 20 mbar vacuum. overall machine dimensions: 1640 x 1000 x 1610(H) mm. Year: 2001

Article Number:  26299
Shoppingcart
 
 
Plasma Etch - MKII - 0C   

Plasma Etch - MKII - 0C

Brand: Plasma Etch

Type: MKII - 0C

Description: Plasma Etcher, 4 different type of gases have been used  Hydrogen Oxygen Tetrafluor and Nitrogen, including Edwards Dry pump system vacuum pump IQ DP80, up to 6 panels, max. panel size: 450 x 630 mm, floor space: 3550 x 3550 mm, max. height: 2140 mm. serial no. 72203. Year 2003. Edwards Dry pump as NEW (Year 2015). Find a detailed description of the etcher in .pdf below.

Article Number:  26079
Shoppingcart
 
 
Lauffer - Lamination press   

Lauffer - Lamination press

Brand: Lauffer

Type: Lamination press

Description: 8 daylights vacuum press, max temperature 290 dgrC., 300 ton, 28m2 per hour, oil heated ( oilmheated by natural gas or oil ), with automatic layup and loading, buffer and unloading station. Incl. 18 sets transfer plates and 50 pcs. new Picard separator plates. max. laminate size: 1450 x 810 mm, system is installed but never run production.Year 2008.

Article Number:  26060
Shoppingcart
 
 
Printprocess  - Targomat III   

Printprocess - Targomat III

Brand: Printprocess

Type: Targomat III

Description: Registration hole driller, incl. input conveyor with panel centering device, max. panel size: 635 x 850 mm, overall machine dimensions: 1000 x 1050 x 1000 mm, 230V, 50/60 Hz, serial no. 9904032. Year 1999.

Article Number:  25896
Shoppingcart
 
 
Buerkle - LAMV 100   

Buerkle - LAMV 100

Brand: Buerkle

Type: LAMV 100

Description: 4 opening oil heated lamination press with cooling press LAMK5, heating/press plate size 750 x 600 mm, 8 transfer plates with corner clamps, layup line included. total length: 7500 mm, serial no. 9788-01/10. Year 2001.

Article Number:  25826
Shoppingcart
 
 
Lauffer - Lamination press   

Lauffer - Lamination press

Brand: Lauffer

Type: Lamination press

Description: 2 fully automatic vacuum 7 opening heating press ( hot & cool on one ), max 270 degr. C, thermal oil, buffer loading station for 7 press books, buffer unloading station for 24 press books, platen size 610 mm x 1070 mm, New never used, year 2011.


Article Number:  25670
Shoppingcart
 
 
MASS - SV 100   

MASS - SV 100

Brand: MASS

Type: SV 100

Description:

Plane Raze Device SV 100 removes the cured plugging paste excess after the hole plugging, max. panel size: 760 x 760 mm, max. panel thickness: 15 mm, overall machine dimensions: 1200 x 1200 x 1900 mm, serial no. 1170. Year 2001.

Article Number:  25355
Shoppingcart
 
 
Glenbrook Technologies - RTX-113   

Glenbrook Technologies - RTX-113

Brand: Glenbrook Technologies

Type: RTX-113

Description: X-ray inspection for registration Multilayer boards, maximum panel width 30", Year 12- 1997

Article Number:  25302
Shoppingcart
 
 
Lauffer - RMV 100   

Lauffer - RMV 100

Brand: Lauffer

Type: RMV 100

Description: 4 opening lamination press, oil heated, max. temperature 280 gr.C., PC controlled up to 50 lamination programs can be stored, 120 pcs separator plates 660 x 505 x 1,50 mm (l x w x thickness ), HML layup station with buffer, 4900 x 1350 x 2350 mm (L x W x H), loading lift, oil heater TT 500 AXEO, separate forced water cooler. Year: 1998.



Article Number:  24676
Shoppingcart
 
 
Cedal - Adara 73 H   

Cedal - Adara 73 H

Brand: Cedal

Type: Adara 73 H

Description: full sheet size continuous lamination system, max panel size 1100 x 1370 mm, max. pressure 220 tons,  max stack height 260 mm, layup system, hot press, cold press, two welding units RBM 66S, year 1999.

Article Number:  24354
Shoppingcart
 
 
Pluritec - Inspecta 75   

Pluritec - Inspecta 75

Brand: Pluritec

Type: Inspecta 75

Description: X-ray drill, WW 1331 125.000 RPM, high resolution CCD camera, PC  controlled 

vision system, vacuum clamp tooling, panel thickness 0,4 / 8mm, tool cassette for 50 tools, S&M 44.
OEM rebuild Year 2013.

Article Number:  23890
Shoppingcart
 
 
Glenbrook Technologies - RTX 113   

Glenbrook Technologies - RTX 113

Brand: Glenbrook Technologies

Type: RTX 113

Description: X-ray inspection system, Anode Voltage 50KV, Quadrant 4 point measurement, Year build 2004.

Article Number:  23824
Shoppingcart
 
 
Printprocess  - Targomat III   

Printprocess - Targomat III

Brand: Printprocess

Type: Targomat III

Description:

Dual head registration hole driller, suitable for inner- and outer layers, suitable for tooling or registration holes. Registration accuracy 0.015 mm, drill diameter 1 - 5 mm, panel thickness 0,05 - 6 mm, 220 V. Serial nr. 00 12 046. Good working. Year 2000.

Article Number:  22593
Shoppingcart
 
 
Multiline - OPE   

Multiline - OPE

Brand: Multiline

Type: OPE

Description: Post etch punch, max panel 24" x 24", Controller 2000 series, serial nr. OPE0352, year 1999.

Article Number:  21810
Shoppingcart
 
 
Multiline - OPL   

Multiline - OPL

Brand: Multiline

Type: OPL

Description: Xray driller dual head, snr. 0038, year 1996.

Article Number:  20887
Shoppingcart
 
 
Multiline - OPE   

Multiline - OPE

Brand: Multiline

Type: OPE

Description: Post etch punch, max panel 21" x 24". Year 1990.

Article Number:  20837
Shoppingcart
 
 
Printprocess  - Targomat II   

Printprocess - Targomat II

Brand: Printprocess

Type: Targomat II

Description: Dual head registration driller suitabel for, inner- and outer layers, suitable for tooling or registration holes. Registration accuracy 0.015 mm, drill dia 1 - 5 mm, panel thickness 0,05 - 6 mm, 220 V. Good working. Year 1997.

Article Number:  20751
Shoppingcart
 
 
Multiline - OPE   

Multiline - OPE

Brand: Multiline

Type: OPE

Description: Post etch punch with controller model 3000, max panel 24" x 30", serial nr. OPE0312, year 1997.

Article Number:  20746
Shoppingcart
 
 
Pluritec - Indubond RBM HP   

Pluritec - Indubond RBM HP

Brand: Pluritec

Type: Indubond RBM HP

Description: Registration bounding machine, 4 head, induction bounding, innerlayers are optimized on a post etch punch then layup follows on a template with dedicated pins. New never used. Year 2004.

Article Number:  20484
Shoppingcart
 
 
Billows - APEP   

Billows - APEP

Brand: Billows

Type: APEP

Description: Post Etch Punch, min/ max panel size 18" x 12"/ 30"x 26", min/ max core thickness 50 um 1.6mm. Increments in X and Y in 0,5 ". year 2004.

Article Number:  20380
Shoppingcart
 
 
Neumayer - Target router   

Neumayer - Target router

Brand: Neumayer

Type: Target router

Description: double sided target router.n1995

Article Number:  15397
Shoppingcart
 
PCB Equipment

 

  PCB Equipment

QUICK LINKS

 

Terms & conditions

Privacy Policy

Our Youtube channel

Vitech Team

Sitemap

 

 

Contact Us

Subscribe to Newsletter

Place Ad

Photo Gallery

FAQ

Reviews

Demo videos

PCB Equipment

CONTACT US

 

Tel: +31 46 423 66 50

Email: info@pcbequipment.com

 

Vitech International BV

Heiweg 14

6161 DA GELEEN

The Netherlands